DoomPaintball.com

Barrels

RAP4 :: Tippmann 98 21 Inch Sniper Barrel

by on Feb.07, 2007, under Articles, Barrels

This is a destructive sniper barrel for the your marker. With this barrel your marker becomes a deadly piece of weaponry on the field. The inside of the barrel has rigid all around in a straight projection. The paintball never touches the barrel, just the rigid. Add this barrel on your marker and you will increase your kill like never before. If you are a sniper, this is the barrel that you will fall in love with.

Tippmann 98 21 inch Sniper Barrel


If you are a sniper, this is the barrel that you will fall in love with.

Tippmann 98 21 inch Sniper Barrel

FacebookTwitterGoogle+
1 Comment :, , more...

RAP4 :: Spyder Hammerhead Barrel

by on Aug.10, 2006, under Articles, Barrels

The Barrel is The Most Technologically Advanced Paintball Barrel in the Industry.

Our purpose was to develop a paintball barrel to achieve strict accuracy and guarantee a 99% ball break for law enforcement for pepper balls.

Barrel Testing

Our engineers undertook the task of developing a barrel specifically designed for paintball to meet the players strict requirements. Existing Technology could not meet their needs. Test results showed some of the same principles in ht e rifle industry applied to paintball but key difference existed due to the liquid and ball characteristics.

Key Findings of Hammerhead

“Degree of Twist” of rifling is critical to accuracy

“Accuracy” and downfeld sound transmission is positively effected by reverse porting

“Reverse Porting” is critical for proper ball regeneration

“Reduced Sound Levels” transmitted downrange

FacebookTwitterGoogle+
Leave a Comment :, , more...

RAP4 :: How to mount the BB Barrel

by on Mar.30, 2006, under Articles, Barrels, How-to Section

How to install the RAP4 BB/Pellet conversion kit. (Please refer to image)

1. Insert BB Barrel into RAP4 Marker with the bigger bore in toward the marker.

2. Make sure the BB Barrel is aligned flush with rubber grommet

3. Install Muzzle Brake and tighten the 3 set screws. Make sure the set screws are tighten firmly to the BB Barrel. It is also recommended to use adhesive on the set screws to prevent the set screws from coming loose.

Click on image to enlarge

FacebookTwitterGoogle+
Leave a Comment :, more...

Who’s Online?