DoomPaintball.com

Tag: BB

RAP4 :: Reusable Airsoft BB Shell Casings

by on Sep.19, 2006, under Articles, Non-Paintball, Other Gear, Tactical Gear

– reusable – over 1000 times
– biodegradable ( in 10 years )

Reusable Airsoft BB Shell Casings

Reusable Airsoft BB Shell Casings (bag of 500)
Reusable Airsoft BB Shell Casings (bag of 1000)

Brass / Casing / Shell Catcher Reuse the shells with this shell catcher

NO mess and you don’t have to pick them up – keep it clean!

FacebookTwitterGoogle+
Leave a Comment :, , more...

RAP4 :: Proud to announce the AirFin

by on Jun.21, 2006, under Articles, News, Other Gear, Press Releases

Real Action Paintball is proud to announce the release the RAP4 Airfin for RAP4 Generation 2 Airsoft guns. The RAP4 Airfin is the first BB that is aerodynamically designed for long-range targets.

The RAP4 Airfin is 6mm in diameter, 11mm long and weighs .19 grams. Designed for Airsoft gaming, it gives players better accuracy and increased distance to engage opponents while you’re safely out of their range!

Each RAP4 Airfin is loaded in a shell casing to feed into the RAP4 from the 20 round detachable magazine; the shell casing ejects out of the gun just like a real M4!

RAP4 Airfin BBs are designed for long-range shooting. Four fins stabilize each BB in flight, just like a torpedo, so they glide through the air for the maximum distant possible. The head of the RAP4 Airfin is oval to reduce wind resistance for increased accuracy.

RAP4 Airfin is the first of its kind, and gives Airsoft players the edge for wining battles! These fin-stabilized BBs take Airsoft to a new level of realism: realistic magazine capacity, shell casing ejection after each shot, and extreme accuracy.

RAP4 Airfin will change how Airsoft games are played, and take your sport to the next level of fun, realism, and excitement.

RAP4 Airfin–available in September 2006 through www.rap4.com and fine retail locations.

FacebookTwitterGoogle+
Leave a Comment :, , more...

RAP4 :: How to mount the BB Barrel

by on Mar.30, 2006, under Articles, Barrels, How-to Section

How to install the RAP4 BB/Pellet conversion kit. (Please refer to image)

1. Insert BB Barrel into RAP4 Marker with the bigger bore in toward the marker.

2. Make sure the BB Barrel is aligned flush with rubber grommet

3. Install Muzzle Brake and tighten the 3 set screws. Make sure the set screws are tighten firmly to the BB Barrel. It is also recommended to use adhesive on the set screws to prevent the set screws from coming loose.

Click on image to enlarge

FacebookTwitterGoogle+
Leave a Comment :, more...

Who’s Online?